Impact Crusher common faults

Impact Crusher There are many common failure, so rule out the method is different.

Impact crusher vibration Exception:

1,indicating material is too large, you can check the feed size.

2,uneven wear, indicating the need to replace the hammer back,

3,rotor imbalance, need to be adjusted,

4,basic handled properly, need to check the anchor bolts and reinforcement.

Impact crusher bearing fever:

1,indicating bearings in oil, the need for timely filling, of course, also cause excessive bearing heating fuel, refueling be sure to check the oil level,

2,bearing damage, we must promptly replace the bearings,

3,cover too tight, to regulate the bolts, elastic moderately suitable.

Impact crusher out of material particle size is too large:

1,indicating hammer wear, the need to hammer busy tone or replacement,

2,hammer and the back plate of the gap is too large, generally adjusted to 15-20mm,

3,feed particle size is too large will also affect the size of outputting feed.

Impact crusher Belt Flip:

1,indicating belt wear, in need of replacement V-belt,

2,because the input belt assembly issues that need to be adjusted in the same plane on the pulley,

3,must pay attention to the quality of V-belt itself.

[PRINT]    [CLOSE]